Question:
I have a audi a4 1.9 TDI 110 HP 1997 and I want to make my diagnosis myself. I research to equip me with the software + cables (knowing that I would soon change with audi a4 tdi 110 or 130 but 2006/2007 and therefore I want a device that can do these two models audi). Thank advance those who will refer me where to buy at a very good price soft + cables.
Answer:
Hi, I tells you what you need and bonus software in French. It is vag com 11.11 , A4 For your 97 up to 2012 vehicles for 22 Euros, If you were better offers, let me know … careful especially not to update the software and use ONLY the CD that comes Evec interface VAG 11.11, The delivery time is long (15 days to 3 weeks, but you can not have everything either).
I am very bad in the kitchen! Currently I have 3 interfaces: – an official ross tech but that is not the CAN and I paid 250 Euros at the time – VAG TACHO an interface to extract the immobilizer PIN (something that cannot do VCDS) – an interface like the one I have recommended vag com 11.11 you to be able to diagnose vehicles after 2004 which are equipped with CAN bus which is a particular diagnostic protocol. Most is that the shipping is FREE! (? Amazing, no) Chinese interface works exactly like the official, IE we can make adjustments, set the TDI timing, change encodings computers (function 07), adapt drain intervals resetter and maintenance indicators. Hopefully your product will work like mine because there is always a risk in transportation. And given the cost of the cable, it does absolutely not worth the redirect…
Question:
I have a 10 inch laptop without cd player and therefore quick question: can I download the software from the website and use it or does it need the cd in the pc?
Answer:
If you do not have a CD drive, you transfer the software CD supplied with the interface on a USB key and you do the software installation like that. Once the software is installed, you plug the interface to the vehicle and a USB port. The driver installation will then take place. You do not care about the Windows pop up that will tell you that the driver has not been validated by Windows (or something like that) and you do install anyway. CONNECTED Do certainly not on the site for the Official Ross Tecxh download a newer software version (currently it is 11.11.5) if your interface is dead before hast could you use it, believe me. Explanation : The downloadable software on the site Ross Tech n ‘ that is to work with interfaces sold by official Ross Tech (ie, not the one you ordered from EOBD2). The software performs official recognition of the interface with which it will work: The Ross tech interfaces feature an integrated cable dongle that can certify that it is not a counterfeit interface. The software comes with Chinese interface has therefore been modified to ignore the Dongle and bypass this aspect of recognition. Additional Information: To install the software, it is not necessary that the diagnostic PC is connected to internet and you must disable the antivirus or the installation of VCDS will be detected as an attack (it is the same case for all diagnostic software whatsoever, even in the case of the official version of VCDS). System of the most suitable operating is Windows XP. A 10-inch screen like yours will do.
Questions:
Is it controlled with software cable is capable of handling A Audi a4 b7? Thank you in advance.
Answer: Of course! Even B8.
Question:
I received singapore yesterday (11 days), this is very correct.Here with me almost, indeed I am a pipe computer. I have neither the time nor the desire to prenre my head with my antivirus right now. Therefore I instalerai later. I change area of work, housing, but no car, of course.
Answer:
If you want to minimize problems with the interface (antivirus and others), invest in a laptop just to make your diagnoses and do not go online with. We find used for 70-80 euros. No need for a racing to the diag. If you want to make logs, beware, however, that the battery is in good condition.
I have a audi a4 1.9 TDI 110 HP 1997 and I want to make my diagnosis myself. I research to equip me with the software + cables (knowing that I would soon change with audi a4 tdi 110 or 130 but 2006/2007 and therefore I want a device that can do these two models audi). Thank advance those who will refer me where to buy at a very good price soft + cables.
Answer:
Hi, I tells you what you need and bonus software in French. It is vag com 11.11 , A4 For your 97 up to 2012 vehicles for 22 Euros, If you were better offers, let me know … careful especially not to update the software and use ONLY the CD that comes Evec interface VAG 11.11, The delivery time is long (15 days to 3 weeks, but you can not have everything either).
I am very bad in the kitchen! Currently I have 3 interfaces: – an official ross tech but that is not the CAN and I paid 250 Euros at the time – VAG TACHO an interface to extract the immobilizer PIN (something that cannot do VCDS) – an interface like the one I have recommended vag com 11.11 you to be able to diagnose vehicles after 2004 which are equipped with CAN bus which is a particular diagnostic protocol. Most is that the shipping is FREE! (? Amazing, no) Chinese interface works exactly like the official, IE we can make adjustments, set the TDI timing, change encodings computers (function 07), adapt drain intervals resetter and maintenance indicators. Hopefully your product will work like mine because there is always a risk in transportation. And given the cost of the cable, it does absolutely not worth the redirect…
Question:
I have a 10 inch laptop without cd player and therefore quick question: can I download the software from the website and use it or does it need the cd in the pc?
Answer:
If you do not have a CD drive, you transfer the software CD supplied with the interface on a USB key and you do the software installation like that. Once the software is installed, you plug the interface to the vehicle and a USB port. The driver installation will then take place. You do not care about the Windows pop up that will tell you that the driver has not been validated by Windows (or something like that) and you do install anyway. CONNECTED Do certainly not on the site for the Official Ross Tecxh download a newer software version (currently it is 11.11.5) if your interface is dead before hast could you use it, believe me. Explanation : The downloadable software on the site Ross Tech n ‘ that is to work with interfaces sold by official Ross Tech (ie, not the one you ordered from EOBD2). The software performs official recognition of the interface with which it will work: The Ross tech interfaces feature an integrated cable dongle that can certify that it is not a counterfeit interface. The software comes with Chinese interface has therefore been modified to ignore the Dongle and bypass this aspect of recognition. Additional Information: To install the software, it is not necessary that the diagnostic PC is connected to internet and you must disable the antivirus or the installation of VCDS will be detected as an attack (it is the same case for all diagnostic software whatsoever, even in the case of the official version of VCDS). System of the most suitable operating is Windows XP. A 10-inch screen like yours will do.
Questions:
Is it controlled with software cable is capable of handling A Audi a4 b7? Thank you in advance.
Answer: Of course! Even B8.
Question:
I received singapore yesterday (11 days), this is very correct.Here with me almost, indeed I am a pipe computer. I have neither the time nor the desire to prenre my head with my antivirus right now. Therefore I instalerai later. I change area of work, housing, but no car, of course.
Answer:
If you want to minimize problems with the interface (antivirus and others), invest in a laptop just to make your diagnoses and do not go online with. We find used for 70-80 euros. No need for a racing to the diag. If you want to make logs, beware, however, that the battery is in good condition.